| Price | Negotiable |
| MOQ | 200 |
| Delivery Time | Negotiable |
| Brand | ANSHI |
| Place of Origin | China |
| Certification | ROHS, ISO9001 |
| Model Number | AS-STB-P-2 |
| Supply Ability | 5000pcs/week |
| standard | GB/T 5169.7-1985 | Place of Origin | China |
| Life circle | ≥200 times | plate | silver 20-40uinch |
| Model Number | AS-STB-P-2 | Supply Ability | 5000pcs/week |
| Protective | GDT | Certification | ROHS, ISO9001 |
| Brand Name | ANSHI | Environment condition | 5-40 degree Celsius ，Relative humidity <85% (+30 degree Celsius)，Atmospheric pressure, 70-106KPa |
| material | pc | Price | Negotiable |
| install | DIN rack | Minimum Order Quantity | 200 |
| name | VX module | pulling-out force | not less than 25N |
| Application | Telecommunication |
| Range of the section: | diameter 0,4… 1,2 mm |
| Diameter on the isolation: | it is maximal 5 mm |
| The current-response characteristics: | 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
| Insulation resistance | |
| “Dry” atmosphere: | > 10 12 Ohm |
| “Moist” atmosphere (standard ASTM Of d618, procedure F): | > 10 12 Om |
| Salt fog: (standard ASTM Of b117) | > 10 10 Ohm |
| Immersion beside the water: (15 days before 3% solution Of naCI) | > 10 10 0m |
| The contact resistance | |
| R of material + R of the contact cross connection + by R of the contact connection of the wires | < 10 m |
| Increase in the contact resistance | |
| After climatic testings: | <2,5 m |
| After 50 connections - turning offs: | <2,5 m |
| Dielectric strength: | >3 kV of direct current during 1 minute |
Mechanical
characteristics
| Screw of the connection of the pair of the distributive wire: | Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
| Housing of the unit of the connection | Transparent polycarbonate |
| the distributive wire: Housing: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
| Fitted contacts: | Tinplated phosphor bronze |
| Contacts of the grounding: | Alloy Cu - Zn - Ni - Ag |
| Contacts of the connection: | Tinplated solid bronze |
| Sealing material before the lower part: | The epoxy resin |
| Sealing material before the upper cable part: | Silicon compound |
| Cover of the pair of the distributive wire: | Polycarbonate |
| Housing of the insertable module: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
| Sealing material of the insertable module: | Gel |
| The ring gasket: | Elastomer EPDM |
| Spring: | the stainless steel |
| Cable laying is the distributive wire: | Thermoplastic rubber |
1
pair
drop
wire
connection
module
with
protection
is
equipped
with
3
pole
230V
gas
tube
arrester
with
fail-safe
protection.
It
is
a
copper
pair
connector,
specifically
designed
to
fit
onto
35mm
DIN
rails.
It
is
designed
to
connect
2
copper
pairs
and
has
common
features
such
as:
Insulation
Displacement
Connection
Reliable
connections
Flame
retardant
performance
Modular
design
and
installations
Water
and
humidity
proof
Durable,
High
Impact,
Ultra
Violet
resistance
Silicon
gel
filled
drop
wire
STB
module
