| Price | Negotiable |
| MOQ | 1 set |
| Delivery Time | 7 -15 days |
| Brand | JHH |
| Place of Origin | Beijing, China |
| Certification | ISO9001, CE |
| Model Number | XNR-400D |
| Packaging Details | Wooden case |
| Payment Terms | T/T, L/C, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 20 sets per month |
| Load | All 21.6kg | Place of Origin | Beijing, China |
| Temperature Accuracy | ±0.2°C | Temp.range | 100-450℃ |
| Time range | 0.1~999s | Packaging Details | Wooden case |
| Product Name | Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature | Model Number | XNR-400D |
| Supply Ability | 20 sets per month | Certification | ISO9001, CE |
| Brand Name | JHH | Payment Terms | T/T, L/C, D/A, D/P, Western Union, MoneyGram |
| The diameter of the mold | 2.095±0.005 mm | Cutting | Manual, automatic |
| Delivery Time | 7 -15 days | Minimum Order Quantity | 1 set |
| Load mode | Electronic loading | Temperature Resolution | 0.1°C |
| Communication | R232 or USB |
Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature
Summary:
Electronic Loading Plastic Material Flow Rate Analysis Melt Flow Index Tester for High-Temperature is a high-precision melt flow tester used to test various plastics and resins in a viscous state through a certain temperature and load. The module and melt flow rate pass through the standard port every 10 minutes. MFR/MVR value is suitable for testing polycarbonate, aromatic sulfone, fluoroplastics, nylon, engineering plastics at high temperatures, as well as plastics with lower melting temperatures such as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC), etc. It is widely used in plastic production, plastic products, petrochemical industry, and related colleges and universities.
Product Character:
1. Three sets of platinum resistance sensors, three separate heating jackets for temperature control, high-precision intelligent PID control, adjustable heating rate ramp rate
2. The experiment can be conducted using either the quality standard method or the volume method, or both methods can be used simultaneously, and the flow rate ratio can be calculated. When the piston rod moves to a certain position, both methods begin testing.
3.
The
countdown
of
material
preheating
seconds
can
be
set
within
240
seconds
(as
specified
in
GB3682),
and
after
the
end
Countdown,
automatic
loading
of
weights,
automatic
cutting
starting
at
intervals,
and
setting
of
American
standard
(ASTM)
preheating
time,
etc.
4. Built in multiple plastic material melt index testing conditions, convenient for customers to access and use at any time, reducing tedious work, and can store the final testing conditions and results. Built in microcomputer, convenient for printing and testing data.
5.
Reserve
RS232
interface
or
USB
interface
to
connect
to
the
computer,
which
can
control
the
instrument
operation
through
the
computer
and
transfer
the
saved
test
data
to
the
computer.
6.
Heavy
objects
can
be
manually
loaded
or
the
ball
screw
can
be
driven
to
rotate
by
a
stepper
motor
to
achieve
automatic
control
of
the
increase
or
decrease
of
the
top
load.
Technical Parameters:
| Model | XNR-400D | |
| Barrel parameters | Inner hole 9.55±0.025mm | |
| Pistons parameters | Piston head: 9.475±0.015mm | |
| Outlet length | 8.000±0.025mm | |
| Paramters | Extrusion hole 1=2.095±0.005mm | |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade | |
| Temperature range | Room Temperature~450degree centigrade | |
| Temperature fluctuation | ±0.2 ℃ | |
| Temperature uniformity | ±1℃ | |
| Temperature display resolution | 0.1 ℃ | |
| Display resolution | 0.1 ℃ | |
| Maximum comsuption | < 600W | |
| Time display resolution | 0. 1s | |
| Weight parameters are as follows: | ||
| Weight accuracy | ±0.5% | |
| Basic configuration | A 0.325kg | |
| B 1.2kg | ||
| C 2. 16kg | ||
| D 3.8kg | ||
| E 5kg | ||
| F 10kg | ||
| G 12.5kg | ||
| H 21.6kg | ||
| Position detection | ||
| Load mode | Electronic loading weights | |
| Loop distance from up and down | 30mm | |
| Control precision | ± 0.1mm | |
| Test flow control | ||
| Times of cutting the material | 0~ 10 times | |
| Material cutting interval | 0~999s(set reference Table 2) | |
| Control flow reaches the set temperature without volatility | ||
| Barrel temperature time | 15 min. | |
| Material be installed | 1 min. | |
|
Material sample temperature recovery time |
4 min. | |
| When binder set | 1min | |
| Output mode | Micro-automatic print output | |
| Communication | R232 or USB interface connect to computer | |
Meet standards:
ISO1133, ASTM D1238, ASTM D3364 and GB/T 3682 method A & B.
Support and Services:
Melt
Flow
Index
Tester
Technical
Support
and
Service
We
provide
technical
support
and
service
for
all
Melt
Flow
Index
Testers.
Our
technical
support
team
is
available
via
phone,
email
and
online
chat
24/7
to
answer
any
questions
or
concerns
you
may
have.
We
provide
detailed
instructions
and
videos
to
help
you
get
the
most
out
of
your
Melt
Flow
Index
Tester.
We
also
offer
a
variety
of
warranty
plans
and
service
contracts
to
keep
your
Melt
Flow
Index
Tester
in
top
working
condition.
Our
warranty
plans
cover
defects
in
materials
and
workmanship
for
up
to
5
years.
Our
service
contracts
include
on-site
maintenance
and
repairs,
as
well
as
the
replacement
of
any
parts
that
are
found
to
be
defective.
If
you
have
any
questions
or
concerns
about
our
Melt
Flow
Index
Tester
technical
support
and
service,
please
do
not
hesitate
to
contact
us.
Packing and Shipping:
The
Melt
Flow
Index
Tester
is
shipped
in
a
sturdy
cardboard
box,
filled
with
foam
to
protect
the
instrument
during
transit.
All
accessories
are
sealed
in
their
own
plastic
bags
and
placed
in
compartments
in
the
box.
The
box
is
then
sealed
with
tape
that
indicates
that
the
instrument
has
been
tested
and
is
ready
for
use.
When
shipping
the
Melt
Flow
Index
Tester,
please
ensure
that
the
box
is
properly
sealed
and
that
the
packaging
is
clearly
marked
with
the
destination
address.
The
instrument
should
be
shipped
using
a
reliable
courier
service
that
offers
tracking
and
insurance.
FAQ:
Q1: What is a Melt Flow Index Tester?
A: The Melt Flow Index Tester, produced by JHH, based in Beijing, China, is a testing instrument used to measure the melt mass-flow rate of thermoplastics.
Q2: What is the purpose of the Melt Flow Index Tester?
A: The Melt Flow Index Tester is used to measure the melt mass-flow rate of thermoplastics, which provides important information for the quality control of plastic materials.
Q3: What kind of thermoplastics can be tested with the Melt Flow Index Tester?
A: The Melt Flow Index Tester can test a wide range of thermoplastics such as polyethylene, polypropylene, ABS, etc.
Q4: What are the features of the Melt Flow Index Tester?
A: The Melt Flow Index Tester has a wide range of features, including a digital display, a data storage function, a user-friendly interface, and a compact design.
Q5: What are the advantages of using the Melt Flow Index Tester?
A: The Melt Flow Index Tester is accurate and reliable, and it can quickly provide important data on the quality of plastic materials. It also has a user-friendly interface and a compact design, making it easy to use and convenient to transport.
