| Price | Negotiable |
| MOQ | 1000pcs |
| Delivery Time | 5-7 work days |
| Brand | TIAN RUI |
| Place of Origin | China |
| Certification | ROHS |
| Model Number | MZ6 |
| Packaging Details | PE bag, Bulk |
| Payment Terms | T/T, Paypal, Mastercard, Wetern Union, Alipay, etc |
| Supply Ability | 1000000PCS per Month |
| Over Current Withstanding | ≥500mA | Place of Origin | China |
| Packaging Details | PE bag, Bulk | Color | Yellow Or Green |
| Over Voltage Withstanding | ≥800V | Model Number | MZ6 |
| Supply Ability | 1000000PCS per Month | Part Name | MZ6 PTC Thermistor |
| Certification | ROHS | Brand Name | TIAN RUI |
| Payment Terms | T/T, Paypal, Mastercard, Wetern Union, Alipay, etc | R25 | 800-1200Ω |
| Price | Negotiable | Delivery Time | 5-7 work days |
| Minimum Order Quantity | 1000pcs | Curie Temperature | 75℃ |
| Coating | Silicon | Package | PE bag |
| Application | Fluorescent lamp, electronic ballast, etc | Diameter | 6mm |
MZ6 75C 800 to1200 Ohm Dia 6mm Time Delay Starting MZ31 PTC Thermistor For Lighting
Description
MZ31 series of PTC Thermistor are applicable to various types of fluorescent lamp, electronic
ballast and electronic energy-saving lamp. The PTC can be connected across the lamp resonator
without changing the circuits. It can change hard start of the ballast and electronic energy-saving
lamp to preheated start and the preheating time of the filament can come up to 0.4-2 seconds,
which will extend the service life of the fluorescent tube by over 3 times.
These directly heated ceramic-based thermistors have a positive temperature coefficient and are primarily intended for overload protection. They consist of a ceramic pellet soldered between two tinned CCS wires and coated with a UL 94 V-0 high temperature hard silicone lacquer.
Application
Features
•
Small
size
•
High
voltage
(800
~
1000VAC
more)
•
Long
life
(more
than
10,000
power
switch)
•
Power
dissipation
is
low
•
Wide
range
of
trip
and
non-trip
currents:
From
11
mA
up
to
800
mA
•
Small
ratio
between
trip
and
non-trip
currents
(It/Int
=
1.5
at
25
°C)
•
High
maximum
inrush
current
(up
to
5.5
A)
•
Leaded
parts
withstand
mechanical
stresses
and
vibration
| Number | Name | Technical Requirements | Leads |
| D | Diameter | 6.0max |
□ Straight
□ Axis Formed
■ In-Forming |
| T | Thickness | 4.5max | |
| L | Lead Length | Min20 | |
| W | Distance between fuses | 5.0±0.5 | |
| d | Diameter of lead | 0.5±0.05 |
Coating Details
| Coating | Material | Color |
|
□ No coating ■ Coating |
□ PF resin ■ Silicon
|
■ Yellow ■ Green |
Electrical Performances
| Number | Items | Technical Requirements | Test Conditions |
| 3-1 |
Resistant for Zero Rated Power |
800-1200Ω |
Atmosphere Temperature:25±2℃ Accuracy of the Test:±0.5% |
| 3-2 |
Over Voltage Withstanding |
≥800V ΔR/Rn≤20% No visual damage
|
Starting Current:≥200mA, Starting Voltage:220VAC,hold on for 7s,and then change to high voltage800VAC,for 6s.the is shown as follows: Stay under the conditions of regular temperature and humidity for 4-5 hours, and then check the Rn again. |
| 3-3 |
Over Current withstanding
|
≥500mA ΔR/Rn≤20% No visual damage |
Starting Current:≥200mA,Voltage 220VAC, switch on the circuit for 1 minute after every 5minutes, switch-off, and repeat this operation for 20 times. Put it under the conditions of regular temperature and humidity for 4-5 hours and then check the Rn again |
| 3-5 | Curie Temperature | 75℃ | Check the temperature at 2 times Rn. |
125/140V Series MZ6 PTC Thermistor
| Item |
MAX. VOLTAGE (V) |
CURRENT WHEN DON’T OPRATE AT 60℃(mA) | poses current when at -10 ℃ (mA) | maximum current(A) | Resistance when 25 ℃ (ohm) | Curie point (℃) | Ontology diameter (Dmax)(mm) | thickness (Tmax)(mm) | lead spacing (W)(mm) | Terminal diameter (phi d)(mm) |
| MZ6B06D120C180RM125V | 125 | 30 | 75 | 0.3 | 180 ±20% | 120 | 6.0 | 5.0 | 5.0 | 0.6 |
| MZ8B08D120C75RM125V | 125 | 65 | 165 | 0.3 | 75 ±20% | 120 | 8.0 | 6.0 | 5.0 | 0.6 |
| MZ8B10D120C47RM125V | 125 | 90 | 230 | 0.5 | 47 ±20% | 120 | 10.0 | 5.5 | 5.0 | 0.6 |
| MZ8B10D120C22RM125V | 125 | 135 | 340 | 0.8 | 22 ±20% | 120 | 10.0 | 5.5 | 5.0 | 0.6 |
| MZ8B13D120C15RM125V | 125 | 175 | 440 | 1.0 | 15 ±20% | 120 | 13.0 | 5.5 | 5.0 | 0.6 |
| MZ8B15D120C10RM125V | 125 | 220 | 550 | 1.2 | 10 ±20% | 120 | 15.0 | 5.5 | 5.0 | 0.6 |
| MZ8B17D120C6R8M125V | 125 | 300 | 750 | 1.4 | 6.8 ±20% | 120 | 17.0 | 5.5 | 5.0 | 0.6 |
| MZ8B17D120C4R7M125V | 125 | 360 | 900 | 1.7 | 4.7 ±20% | 120 | 17.0 | 5.5 | 5.0 | 0.6 |
| MZ8B17D120C3R3M125V | 125 | 420 | 1050 | 2.0 | 3.3 ±20% | 120 | 17.0 | 5.5 | 5.0 | 0.6 |
| MZ8B08D120C33RM140V | 140 | 100 | 230 | 0.5 | 33 ±20% | 120 | 8.0 | 6.0 | 5.0 | 0.6 |
| MZ8B10D120C22RM140V | 140 | 140 | 330 | 1.0 | 22 ±20% | 120 | 10.0 | 6.0 | 5.0 | 0.6 |
| MZ8B12D120C15RM140V | 140 | 170 | 400 | 1.0 | 15 ±20% | 120 | 12.0 | 6.0 | 5.0 | 0.6 |
| MZ8B13D120C10RM140V | 140 | 220 | 510 | 1.0 | 10 ±20% | 120 | 13.0 | 6.0 | 5.0 | 0.6 |
| MZ8B15D120C6R8M140V | 140 | 290 | 670 | 1.0 | 6.8 ±20% | 120 | 15.0 | 6.0 | 5.0 | 0.6 |
| MZ8B17D120C5R6M140V | 140 | 340 | 780 | 2.0 | 5.6 ±20% | 120 | 17.0 | 6.0 | 5.0 | 0.6 |
MOUNTING
PTC
thermistors
can
be
mounted
by
wave,
reflow,
or
hand-soldering.
Current
levels
have
been
determined
according
IEC
60738
conditions.
Different
ways
of
mounting
or
connecting
the
thermistors
can
influence
their
thermal
and
electrical
behavior.
Standard
operation
is
in
still
air,
any
potting
or
encapsulation
of
PTC
thermistors
is
not
recommended
and
will
change
its
operating
characteristics.
Typical
Soldering
235
°C;
duration:
5
s
(Lead
(Pb)-bearing)
245
°C,
duration:
5
s
(Lead
(Pb)-free)
Resistance
to
Soldering
Heat
260
°C,
duration:
10
s
max.
Contact Details:
Andy Wu
Email: andy@tianrui-fuse.com.cn
Tel/Whatsapp: +86 13532772961
Wechat: HFeng0805
Skype: andywutechrich
QQ: 969828363
