MK64FN1M0VLL12 MCU Kinetis K60 M4 Microcontroller ICs Chip Lead Free

MK64FN1M0VLL12 Kinetis K60 M4 series Microcontroller IC MCU Electronic componnets

MK64FN1M0VLL12 Kinetis K60 M4 series Microcontroller IC MCU  Electronic componnets

ARM® Cortex®-M4 series Microcontroller IC 32-Bit 120MHz 1MB (1M x 8) FLASH 100-LQFP (14x14)

Kinetis K64F Sub-Family Data Sheet 120 MHz ARM® Cortex®-M4-based Microcontroller with FPU

The K64 product family members are optimized for cost-sensitive applications requiring low-power, USB/Ethernet connectivity, and up to 256 KB of embedded SRAM. These devices share the comprehensive enablement and scalability of the Kinetis family.

This product offers: • Run power consumption down to 250 μA/MHz. Static power consumption down to 5.8 μA with full state retention and 5 μs wakeup. Lowest Static mode down to 339 nA • USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO Vreg, with USB device crystal-less operation • 10/100 Mbit/s Ethernet MAC with MII and RMII interfaces.

Performance :

• Up to 120 MHz ARM® Cortex®-M4 core with DSP instructions and floating point unit Memories and memory interfaces

• Up to 1 MB program flash memory and 256 KB RAM

• Upto 128 KB FlexNVM and 4 KB FlexRAM on devices with FlexMemory

• FlexBus external bus interface System peripherals

• Multiple low-power modes, low-leakage wake-up unit

• Memory protection unit with multi-master protection • 16-channel DMA controller

• External watchdog monitor and software watchdog Security and integrity modules

• Hardware CRC module • Hardware random-number generator

• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms

• 128-bit unique identification (ID) number per chip Analog modules

• Two 16-bit SAR ADCs

• Two 12-bit DACs

• Three analog comparators (CMP)

• Voltage reference

Communication interfaces
• Ethernet controller with MII and RMII interface
• USB full-/low-speed On-the-Go controller
• Controller Area Network (CAN) module
• Three SPI modules
• Three I2C modules. Support for up to 1 Mbit/s
• Six UART modules
• Secure Digital Host Controller (SDHC)
• I2S module
Timers
• Two 8-channel Flex-Timers (PWM/Motor control)
• Two 2-channel FlexTimers (PWM/Quad decoder)
• IEEE 1588 timers
• 32-bit PITs and 16-bit low-power timers
• Real-time clock
• Programmable delay block
Clocks
• 3 to 32 MHz and 32 kHz crystal oscillator
• PLL, FLL, and multiple internal oscillators
• 48 MHz Internal Reference Clock (IRC48M)
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C

Specifications:

Related products:

Environmental & Export Classifications