Applications requiring ± .0001 tolerance and to produce a 4Ra finish (optional) with the lowest

Machine Travels: X x Y x Z in (mm)
15.7 x 11.8 x 8.7 (400 x 300 x 220)
Maximum Workpiece Dimensions: W x D x H in (mm)
31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg)
1102 (500)
Table Dimensions: in (mm)
25.2 x 21.3 (640 x 540)
U/V Travels (from center): in (mm)
±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm)
15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required)
45 deg. @ 1.8″ 45mm (No AT Possible)
Table Rapid Feed

Speed: in/min (mm/min)
51.2 (1300)

Power Supply
V350-V
Minimum Drive Unit / Resolution
0.000002 / 2 µin ( 0.00005 / 50nm)
User Program Storage [Hard Disk Size]
1 GB [32 GB CFAST Card Size]
Wire Diameter Possible: in (mm)
0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm)
0.02 (0.5)
Max. Wire Spool size On Machine / Cabinet STD: lb (kg)
22 / 44 (10 / 20)
Filters / Type
2 / Paper
Filter Tank Capacity: gal (L)
145 (550)
Machine System Dimensions: in (mm)
79.7 x 106.4 (2025 x 2702)
Machine Installed Height: in (mm)
79.3 (2015)
Machine System Weight: lb (kg)
5952 (2700)
Fluid System Weight: lb (kg)
Included with machine
Power Requirements [KVA]
200-230V [13.5] Built in AVR
Compressed Air Requirements
2.7 cu.ft./min. @ 71~100 psi
Floor Plan