| Price | Contact Us |
| MOQ | 1set |
| Delivery Time | 45-60days |
| Brand | DGAX |
| Place of Origin | Dongguan,China |
| Certification | CE |
| Model Number | DenT |
| Packaging Details | Foam inner+ outside wooden case |
| Payment Terms | T/T |
| Supply Ability | 100sets/month |
| Feeding System | Auto Feeding | Place of Origin | Dongguan,China |
| Warranty | 1 Year | Packaging Details | Foam inner+ outside wooden case |
| Power supply | AC220V±10% 50HZ/60HZ | Model Number | DenT |
| Supply Ability | 100sets/month | Certification | CE |
| Brand Name | DGAX | Payment Terms | T/T |
| Function | Products defect inspection | Core Components | Servo Motor, PLC, cylinder |
| Price | Contact Us | Delivery Time | 45-60days |
| Efficiency | Max 36,000pcs/h (Depends on size and material ) | Minimum Order Quantity | 1set |
| Application | Rubbers, Plastics, PTFE, Hardware | Quantity of Camera | Depends on detection requirement |
The
difference
between
visual
inspection
machine
and
manual
inspection
Inspection
cost
Visual
inspection
machine
The
initial
investment
cost
of
the
visual
inspection
machine
is
high,
including
the
purchase
cost
of
the
equipment,
installation
and
commissioning
costs,
and
related
software
costs.
However,
in
the
long
run,
it
can
greatly
reduce
labor
costs,
and
due
to
its
efficient
detection
capabilities,
it
can
reduce
losses
caused
by
quality
problems.
The
operating
costs
of
the
visual
inspection
machine
mainly
include
power
consumption
and
equipment
maintenance
costs.
The
maintenance
of
the
equipment
requires
professional
technicians,
but
if
properly
maintained,
the
equipment
can
be
used
for
a
long
time.
Manual
inspection
The
initial
cost
of
manual
inspection
is
relatively
low,
mainly
the
cost
of
recruiting
and
training
inspection
personnel.
However,
over
time,
labor
costs
will
continue
to
increase,
including
wages,
benefits,
training
and
other
expenses.
In
addition,
manual
inspection
may
cause
more
quality
problems
due
to
the
proneness
of
misjudgment
and
missed
inspections,
thereby
increasing
the
rework
cost
and
loss
of
products.
Surface control system
Consists of two workstations mounted above and below the glass plate, each containing a high precision colour camera and a fixed focus lens.
Has an independently digitally adjustable colour illumination system to optimise the image taking.
The main function is to detect cosmetic defects on the upper and lower surfaces.
Inner and outer surface control systems
Consists of outer side workstastions, each with four 2 megapixel colour cameras distributed at 90 degree angles. Each camera uses a low distortion lens. A further feature os that there are two colour lighting systems distributed above and below.
The lighting system can be adjusted digitally and independently to optimise the photographic image.
For the detection of surface defects on the outer side of the product.
Wirt is an optical inspection device specially developed to detect dimensional and surface defects in silicone waterproof plugs. It is capable of inspecting waterproof plugs of various shapes with high precision within its inspection range. These products are inspectied for defects by a series of inspection stations using high-precision industrial cameras. The images obtained by the cameras are transmitted without data loss or interference to a computer managed by a real-time system for image processing: through the operator interface, the user can interact with the operating system in a simple and intuitive way. The detection system is stable, reliable and efficient.
After image processing, objects are imported into three different storage areas for conforming, dimensionally defective and cosmetically defective objects according to the preset inspection criteria. The object inspection parameters are quick and easy to set, the equipment and the feeding device are easy to clean, and the inspection frequency is high.
| Technical parameters | 12 |
| Materials | Silica gel |
| Colour | Full colour |
| Minimum outer diameter(mm) | 3mm |
| Maximum outer diameter(mm) | 12mm |
| Minimum detectable thickness(mm) | 2mm |
| Maximum detectable thickness(mm) | 12mm |
| efficiency | Maximum speed 1000pcs/min depends on product surface and size. |
| Feeding | Vibratory feeding |
| Size Detection | 12 |
| Camera | B/W |
| Detection range(mm) | Φ18 |
| Maximum Detection height(mm) | 12mm |
| Resolution ratio(mm) | 0.001 |
| Detection accuracy(mm) | +/-0.008 |
| Repeated accuracy(mm) | +/-0.005 |
| Height Measurement Inspection | 12 |
| Detection range(mm) | 12mm |
| Resolution ratio(mm) | 0.001 |
| Detection accuracy(mm) | +/-0.008 |
| Repeated accuracy(mm) | +/-0.005 |
| Surface Workstation | 12 |
| Camera | Full colour |
| Individual camera detection range (mm) | 12mm |
| Optical resolution (mm/px) | 0.010 |
| Minimum detectable defect area (mm) | 0.030x0.030 |
| Inner side inspection station (optional) | 12 |
| Camera | Full colour |
| Individual camera detection range (mm) | 12mm |
| Optical resolution (mm/px) | 0.010 |
| Minimum detectable defect area (mm) | 0.030x0.030 |
| Outer Side Inspection Station | 12 |
| Camera | Full colour |
| Individual camera detection range (mm) | 12 |
| Optical resolution (mm/px) | 0.012 |
| Minimum detectable defect area (mm) | 0.036x0.036 |
| optional |
| 5L Hopper |
| 15L Hopper |
| Dust Hood |
| Manual cleaning control |
| Packaging Machine |
Application
of
DenT-
Double
glass
table
visual
inspection
machine
Electronic components, precision injection molding, hardware fasteners,
sealing rings,rubber silicone,industrial silver contacts, etc.
