| Price | Negotiable |
| MOQ | Negotiable |
| Delivery Time | Negotiable |
| Model Number | ZW-F |
| Cooling plate material | copper | Lead Time | 15 days |
| Time setting range | 0~300h | Power supply/power | AC: 220V/1.8KW |
| Temperature Range | -70°C to 150°C | Package | Standard and strong wooden case |
| Model Number | ZW-F |
Hollow
Glass
UV
Irradiation
Detector
Tester
Ultraviolet
Radiation
Detector
1.
Introduction
I.
Use
ZW-F
ultraviolet
radiation
detector
is
designed
and
manufactured
according
to
the
technical
requirements
of
national
standard
GB/T11944-2012<<
insulating
glass
>>,
used
to
test
the
ability
of
insulating
glass
to
resist
ultraviolet
radiation.
Principle
of
operation
Install
UV
lamp
in
the
closed
test
box,
the
glass
sample
in
the
appropriate
place
in
the
box,
to
accept
ultraviolet
radiation,
in
the
other
side
of
the
sample
close
contact
with
the
cooling
plate,
cooling
plate
by
tap
water
cooling,
test
whether
the
hollow
glass
after
ultraviolet
irradiation
in
the
cooling
plate
fog,
oil
or
other
contaminants,
to
determine
the
resistance
to
ultraviolet
radiation
performance
of
the
hollow
glass.
2. Technical Parameters
| Temperature in the test chamber | + 3 ºC to 50 ºC |
| Power supply/power | AC: 220V/1.8KW |
| Cooling plate material | copper |
| Cooling plate material | copper |
| Light source output power | > 40W/m2 |
| Distance between the center of the sample and the light source | 300mm |
| Test light source | Uv lamp MLU 300W |
| Water temperature at inlet and outlet of cooling tray | 16 ºC + 2 ºC |
| Time setting range | 0~300h |
| Working environment temperature | No less than 20ºC |
